Look for consistent micro-perforations across the entire film.
Ensures bubble-free installation and professional finish.
Premium films maintain color integrity when stretched
Cheap wraps show discoloration at stress points.
Allows repositioning during install, good for new hand
High-quality adhesive has no irritating smell & won't leave residue upon removal.
��️ Shield your car from acid rain, bird droppings, gravel scratches and UV rays
�� Reduces stone chip damage by up to 40%
�� Maintain the original paint’s resale value
According to the data of the US insurance, about 1/3 of auto accidents are fender bender each year.
According to the statistics of NHTSA, in urban areas, about 60% of automobile accidents are low-speed collisions, mainly minor scratches.
60% of your car may be scratched just in the parking lot, and 70% may not get the contact information of the car accident.
11.5mil thickness of Ravoony car wrap, good protection of car paint from scratching.
You may have to pay $1,000 to $5,000 for whole car resparay.
The problem of color difference for partial painting is hard to avoid.
With Ravoony car wrap, full wrap is 400$~600$, partail wrap without color difference.
If you don’t like the color of your car paint, wrap it or paint it?
Repainting will cause damage to the original car paint. When you plan to sell it again, the appraiser will also discount the price because it is not the original car paint.
More than 400+ colors available from Ravoony car wrap, choose any color you like, keep value of orginal car paint.
Brand
Ravoony
Color
Brown&Grey
Finish
Matte
SKU
RAV-8005
Film Type
Calender
Adhesive
Acrylic-based, reposition able, slideable
Back Paper
Paper / PET
Recommended Uses
Full vehicle wraps & graphics, architectural signage, buses, cars & vans, mirrors, bumpers, hoods, roofs, vehicle lettering, watercraft, decals & stripes, accents & trim, electronics, skins & more
Conformability
Flat, simple, and moderate compound curves, convex and concave surfaces
Thickness
11.5mil~13.5mil / 0.3mm~0.35mm
Durability
Up to 3~5 years
Removable
Up to 3 years
Application Type
Dry
Initial Tack (N/25mm)
18N
20H Tack (N/25mm)
20N
1 Week Tack (N/25mm)
22N
Tensilestrengthen
40N/15MM
Breaking Strength(%)
>200%
Application Temperature
From +15℃ to +40℃
Post-heating Temperature
110°C flat surfaces, 130°C curves, and overlaps
Shrinkage
Less than 4%
Skill Level Needed
Low
Aftercare
PH neutral, Avoid wax or solvents
Shelf Life
2 years(stored in +10°C to +35°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place)
No comments yet~